EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Panasonic Servo Motor Drive
Panasonic Servo Motor Drive
Leading Manufacturer of panasonic mddln45be minas a6 series ac servo drive, 1 kw, mhmf082l1v2m panasonic minas a6 series servo motor, 750 watt with brake, mdmf202l1g6m panasonic minas a6 series servo motor, 2 kw, mdmf302l1g6m panasonic minas a6 series servo motor, 3 kw, mdmf302l1h6m panasonic minas a6 series servo motor, 3 kw with brake and mdmf502l1g6m panasonic minas a6 series servo motor, 5 kw from Ahmedabad.
Panasonic MDDLN45BE Minas A6 Series AC Servo Drive, 1 KW
Get Latest Price
Product Details:
| Power | 1 KW |
| Type | AC |
| Voltage | 3 Phase |
| Brand | Panasonic |
| Encoder Type | ABS |
| Driver Type | EtherCat |
- Frequency response: 3200 Hz
- Supports network communication "EtherCAT"
- High-Speed 100 Mbps
- Real-time auto tuning function, Anti-vibration filters are available.
- EtherCAT with many supported applications
[7 control modes, 32 hm methods, DC(Synch), SM2(Synch), FreeRUN (Non-synch)] - System-up possible with various slaves.
- Supports PC-based controller.
- Smallest EtherCAT drive in market.
- Supports pc setup software PANATERM
- Lifespan diagnosis/Deterioration diagnosis
Yes! I am InterestedRequest A Callback
MHMF082L1V2M Panasonic Minas A6 Series Servo Motor, 750 Watt with Brake
Get Latest Price
Product Details:
| Type | AC |
| Voltage | 220V AC |
| Brand | Panasonic |
| Usage/Application | Industrial |
| Model Name/Number | MHMF082L1V2M |
| Input Phase | Single Phase |
| Torque | 2.39 NM |
| Item | Specifications |
|---|---|
| Part Number | MHMF082L1V2M |
| Details | High inertia, Lead wire type |
| Family Name | MINAS A6 |
| Series | MHMF Series |
| Type | High inertia |
| Special Order Product | Special Order Product |
| Cautions for Special ordering product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP65 |
| About Enclosure | Except rotating portion of output shaft and leadwire end. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 80 mm sq. |
| Flange sq. dimension (Unit:mm) | 80 |
| Motor lead-out configuration | Lead wire |
| Motor encoder connector | Lead wire |
| Power supply capacity (kVA) | 1.8 |
| Voltage specifications | 200 V |
| Rated output | 750 W |
| Rated current (A (rms)) | 3.8 |
| Holding brake | with |
| Mass (kg) | 3.0 |
| Oil seal | with |
| Shaft | Key-way, center tap |
| Rated torque (N ⋅ m) | 2.39 |
| Continuous stall torque (N ⋅ m) | 2.86 |
| Momentary Max. peak torque (N ⋅ m) | 8.36 |
| Max. current (A (o-p)) | 18.8 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4283 |
| Rated rotational speed (r/min) | 3000 |
| Rated rotational Max. speed (r/min) | 6000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 1.66 |
| Recommended moment of inertia ratio of the load and the rotor | 20 times or less |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
Brake specifications
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 3.8 or more |
| Engaging time (ms) | 70 or less |
| Releasing time (ms) | 20 or less |
| Exciting current (DC) (A) | 0.42 |
| Releasing voltage (DC) (V) | 1 or more |
| Exciting voltage (DC) (V) | 24 ± 2.4 |
| About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. |
Yes! I am InterestedRequest A Callback
MDMF202L1G6M Panasonic Minas A6 Series Servo Motor, 2 KW
Get Latest Price
Product Details:
| Type | AC |
| Voltage | 220V AC |
| Brand | Panasonic |
| Usage/Application | Industrial |
| Model Name/Number | MDMF202L1G6M |
| Torque | 9.55 NM |
| Power | 2 kw |
| RPM | 2000 |
| Item | Specifications |
|---|---|
| Part Number | MDMF202L1G6M |
| Product details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 130 mm sq. |
| Flange size (mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 3.8 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 2000 |
| Rated current (A rms) | 9.9 |
| Holding brake | without |
| Mass (kg) | 6.9 |
| Oil seal | with |
| Shaft | Key-way |
| Rated torque (N ⋅ m) | 9.55 |
| Continuous stall torque (N ⋅ m) | 10.0 |
| Momentary Max. peak torque (N ⋅ m) | 28.6 |
| Max. current (A 0-p) | 42 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4285 |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Max. rotational speed (r/min) | 3000 |
| Inertia of rotor ( x10-4 kg ⋅ m²) | 12.1 |
| Recommended inertia ratio | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
Yes! I am InterestedRequest A Callback
MDMF302L1G6M Panasonic Minas A6 Series Servo Motor, 3 KW
Get Latest Price
Product Details:
| Type | AC |
| Voltage | 220V |
| Power | 3 KW |
| Usage/Application | Industrial |
| RPM | 2000 |
| Torque | 14.3 NM |
| Item | Specifications |
|---|---|
| Part Number | MDMF302L1G6M |
| Product details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 130 mm sq. |
| Flange size (mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 5.2 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 3000 |
| Rated current (A rms) | 16.4 |
| Holding brake | without |
| Mass (kg) | 9.3 |
| Oil seal | with |
| Shaft | Key-way |
| Rated torque (N ⋅ m) | 14.3 |
| Continuous stall torque (N ⋅ m) | 15.0 |
| Momentary Max. peak torque (N ⋅ m) | 43.0 |
| Max. current (A 0-p) | 70 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4285 x 2 in parallel |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Max. rotational speed (r/min) | 3000 |
| Inertia of rotor ( x10-4 kg ⋅ m²) | 18.6 |
| Recommended inertia ratio | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
Yes! I am InterestedRequest A Callback
MDMF302L1H6M Panasonic Minas A6 Series Servo Motor, 3 KW With Brake
Get Latest Price
Product Details:
| Type | AC |
| Voltage | 220V |
| Power | 3 KW |
| Usage/Application | Industrial |
| RPM | 2000 |
| Torque | 14.3 |
| Item | Specifications |
|---|---|
| Part Number | MDMF302L1H6M |
| Product details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 130 mm sq. |
| Flange size (mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 5.2 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 3000 |
| Rated current (A rms) | 16.4 |
| Holding brake | with |
| Mass (kg) | 10.9 |
| Oil seal | with |
| Shaft | Key-way |
| Rated torque (N ⋅ m) | 14.3 |
| Continuous stall torque (N ⋅ m) | 15.0 |
| Momentary Max. peak torque (N ⋅ m) | 43.0 |
| Max. current (A 0-p) | 70 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4285 x 2 in parallel |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Max. rotational speed (r/min) | 3000 |
| Inertia of rotor ( x10-4 kg ⋅ m²) | 19.6 |
| Recommended inertia ratio | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 22.0 or more |
| Engaging time (ms) | 110 or less |
| Releasing time (ms) | 50 or less |
| Exciting current (DC) (A) | 0.9 |
| Releasing voltage (DC) (V) | 2 or more |
| Exciting voltage (DC) (V) | 24 ± 2.4 |
| About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. Please refer to the details of [Motor Specification Description] , "Specifications of Built-in Holding Brake" and "Notes on [Motor specification] page, Note: 4. |
Yes! I am InterestedRequest A Callback
MDMF502L1G6M Panasonic Minas A6 Series Servo Motor, 5 KW
Get Latest Price
Product Details:
| Type | AC |
| Voltage | 220V |
| Power | 5 KW |
| Usage/Application | Industrial |
| RPM | 2000 |
| Torque | 23.9 NM |
| Item | Specifications |
|---|---|
| Part Number | MDMF502L1G6M |
| Product details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 176 mm sq. |
| Flange size (mm) | 176 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 7.8 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 5000 |
| Rated current (A rms) | 23.3 |
| Holding brake | without |
| Mass (kg) | 15.6 |
| Oil seal | with |
| Shaft | Key-way |
| Rated torque (N ⋅ m) | 23.9 |
| Continuous stall torque (N ⋅ m) | 26.3 |
| Momentary Max. peak torque (N ⋅ m) | 71.6 |
| Max. current (A 0-p) | 99 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4285 x 2 in parallel |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Max. rotational speed (r/min) | 3000 |
| Inertia of rotor ( x10-4 kg ⋅ m²) | 58.2 |
| Recommended inertia ratio | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
Yes! I am InterestedRequest A Callback
Panasonic Servo Motor And Drive
Product Price: Rs 40,000 / PieceGet Best Price
Product Details:
| Rated Power | 1 kW |
| Brand | Panasonic |
| Motor Type | AC |
| Usage/Application | Packaging, Plastic Processing, Robots, Textile Industries, Paper and Printing, Metal Processing |
| Input Phase | Single/Three |
| Power | 200W to 11KW |
Yes! I am InterestedRequest A Callback
Panasonic MBDLN25SE A6 Series AC Servo Drive, 400W
Product Price: Rs 16,500 / PieceGet Best Price
Product Details:
| Power Rating | 400 W |
| Input Voltage | 220 VAC |
| Phase | Single Phase |
| Brand | Panasonic |
| Model Name/Number | MBDLN25SE |
| Encoder | Absolute |
| Driver Type | Basic Pulse |
| Item | Specifications |
|---|---|
| Part Number | MBDLN25SE |
| Product details | A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
| Family Name | MINAS A6 |
| Series | A6SE series |
| Type | Position control type |
| Frame | B-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control |
| About control method | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. |
| Safety Function | without |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | Pulse train only |
| Dimensions (W) (Unit: mm) | 55 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 130 |
| Mass (kg) | 1.0 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) |
| Communication function | USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Regeneration | No built-in regenerative resistor (external resistor only) |
| Control mode | Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
Yes! I am InterestedRequest A Callback
Panasonic MCDLN35SE Minas A6 Series AC Servo Drive, 750 Watt
Product Price: Rs 20,200 / PieceGet Best Price
Product Details:
| Rated Power | 400 W |
| Brand | Panasonic |
| Encoder Type | ABS |
| Driver Type | Basic Pulse |
| Supply Voltage | Single/3-phase 200 V |
| Item | Specifications |
|---|---|
| Part Number | MCDLN35SE |
| Product details | A6SE series Position control type (Incremental system only, Pulse train only) without the safety function |
| Family Name | MINAS A6 |
| Series | A6SE series |
| Type | Position control type |
| Frame | C-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control |
| About control method | A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only. |
| Safety Function | without |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | Pulse train only |
| Dimensions (W) (Unit: mm) | 65 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 170 |
| Mass (kg) | 1.6 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) |
| Communication function | USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
Yes! I am InterestedRequest A Callback
Panasonic MDDLT45SF Minas A6 Series AC Servo Drive, 1 KW
Product Price: Rs 26,500 / PieceGet Best Price
Product Details:
| Series | MINAS A6 |
| Power Rating | 1 kW |
| Input Voltage | 220 VAC |
| Rated Power | 1 kW |
| Brand | Panasonic |
| Encoder Type | ABS |
| Driver Type | Multi Fuction |
| Supply Voltage | Single/3-phase 200 V |
| Item | Specifications |
|---|---|
| Part Number | MDDLT45SF |
| Product details | A6SF series Multifunction type (Pulse analog full-closed) with the safety function |
| Family Name | MINAS A6 |
| Series | A6SF series |
| Type | Multifunction type |
| Frame | D-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control, Velocity control, Torque control, and Full-closed control |
| Safety Function | with |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | Analog /Pulse, Modbus (RS485 /RS232) |
| Dimensions (W) (Unit: mm) | 85 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 170 |
| Mass (kg) | 2.1 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| External scale feedback | A/B phase, homing signal differential input. ”A communication protocol developed for Servo Motor encoders of Panasonic Industry Co., Ltd.” is also supported. |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Input |
3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs) |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) Both open collector and line driver interface can be connected. High speed line driver interface can be connected. |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) Line driver output for encoder pulses (A/B/Z signal) or external feedback pulses (EXA/EXB/EXZ signal) open collector output also available for Z or EXZ signal. |
| Communication function | USB, RS232, RS485, Modbus-RTU |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RS232 | 1:1 communication |
| Communication function: RS485 | 1: n communication (max 31) |
| Communication function: Modbus-RTU | 1: n communication |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
Yes! I am InterestedRequest A Callback
Panasonic MDDLT55SF Minas A6 Series AC Servo Drive, 1.5 KW
Product Price: Rs 26,700 / PieceGet Best Price
Product Details:
| Series | MINAS A6 |
| Power Rating | 1.5 kW |
| Rated Power | 1.5 kW |
| Driver Type | Multi Function |
| Encoder Type | ABS |
| Supply Voltage | Single/3-phase 200 V |
| Model | MDDLT55SF |
| Item | Specifications |
|---|---|
| Part Number | MDDLT55SF |
| Product details | A6SF series Multifunction type (Pulse analog full-closed) with the safety function |
| Family Name | MINAS A6 |
| Series | A6SF series |
| Type | Multifunction type |
| Frame | D-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control, Velocity control, Torque control, and Full-closed control |
| Safety Function | with |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | Analog /Pulse, Modbus (RS485 /RS232) |
| Dimensions (W) (Unit: mm) | 85 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 170 |
| Mass (kg) | 2.1 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| External scale feedback | A/B phase, homing signal differential input. ”A communication protocol developed for Servo Motor encoders of Panasonic Industry Co., Ltd.” is also supported. |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Input |
3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs) |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) Both open collector and line driver interface can be connected. High speed line driver interface can be connected. |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) Line driver output for encoder pulses (A/B/Z signal) or external feedback pulses (EXA/EXB/EXZ signal) open collector output also available for Z or EXZ signal. |
| Communication function | USB, RS232, RS485, Modbus-RTU |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RS232 | 1:1 communication |
| Communication function: RS485 | 1: n communication (max 31) |
| Communication function: Modbus-RTU | 1: n communication |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
Yes! I am InterestedRequest A Callback
Panasonic MDDLN55BE Minas A6 Series AC Servo Drive, 1.5 KW
Product Price: Rs 31,700 / PieceGet Best Price
Product Details:
| Series | MINAS A6 |
| Power Rating | 1.5 kW |
| Input Voltage | 220 VAC |
| Rated Power | 1.5 kW |
| Driver Type | EtherCat |
| Encoder Type | ABS |
| Brand | Panasonic |
| Model | MDDLN55BE |
Yes! I am InterestedRequest A Callback
Panasonic MEDLT83SF Minas A6 Series AC Servo Drive, 2 KW
Product Price: Rs 40,000 / PieceGet Best Price
Product Details:
| Series | MINAS A6 |
| Power Rating | 2 kW |
| Input Voltage | 220 VAC |
| Rated Power | 2 kw |
| Brand | Panasonic |
| Driver Type | Multi Function |
| Model | MEDLT83SF |
| Supply Voltage | 3-phase 200 V |
| Item | Specifications |
|---|---|
| Part Number | MEDLT83SF |
| Product details | A6SF series Multifunction type (Pulse analog full-closed) with the safety function |
| Family Name | MINAS A6 |
| Series | A6SF series |
| Type | Multifunction type |
| Frame | E-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control, Velocity control, Torque control, and Full-closed control |
| Safety Function | with |
| Supply voltage | 3-phase 200 V |
| I/F Classification of type | Analog /Pulse, Modbus (RS485 /RS232) |
| Dimensions (W) (Unit: mm) | 85 |
| Dimensions (H) (Unit: mm) | 168 |
| Dimensions (D) (Unit: mm) | 193 |
| Mass (kg) | 2.7 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | 3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| External scale feedback | A/B phase, homing signal differential input. ”A communication protocol developed for Servo Motor encoders of Panasonic Industry Co., Ltd.” is also supported. |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Input |
3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs) |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) Both open collector and line driver interface can be connected. High speed line driver interface can be connected. |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) Line driver output for encoder pulses (A/B/Z signal) or external feedback pulses (EXA/EXB/EXZ signal) open collector output also available for Z or EXZ signal. |
| Communication function | USB, RS232, RS485, Modbus-RTU |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RS232 | 1:1 communication |
| Communication function: RS485 | 1: n communication (max 31) |
| Communication function: Modbus-RTU | 1: n communication |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
Yes! I am InterestedRequest A Callback
Panasonic MFDLTA3SF Minas A6 Series AC Servo Drive, 3 KW
Product Price: Rs 53,100 / PieceGet Best Price
Product Details:
| Rated Power | 3 kW |
| Driver Type | Multi Function |
| Brand | Panasonic |
| Supply Voltage | 3 Phase |
| Model | MFDLTA3SF |
| Item | Specifications |
|---|---|
| Part Number | MFDLTA3SF |
| Product details | A6SF series Multifunction type (Pulse analog full-closed) with the safety function |
| Family Name | MINAS A6 |
| Series | A6SF series |
| Type | Multifunction type |
| Frame | F-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control, Velocity control, Torque control, and Full-closed control |
| Safety Function | with |
| Supply voltage | 3-phase 200 V |
| I/F Classification of type | Analog /Pulse, Modbus (RS485 /RS232) |
| Dimensions (W) (Unit: mm) | 130 |
| Dimensions (H) (Unit: mm) | 220 |
| Dimensions (D) (Unit: mm) | 216 |
| Mass (kg) | 5.2 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | 3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| External scale feedback | A/B phase, homing signal differential input. ”A communication protocol developed for Servo Motor encoders of Panasonic Industry Co., Ltd.” is also supported. |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Input |
3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs) |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) Both open collector and line driver interface can be connected. High speed line driver interface can be connected. |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) Line driver output for encoder pulses (A/B/Z signal) or external feedback pulses (EXA/EXB/EXZ signal) open collector output also available for Z or EXZ signal. |
| Communication function | USB, RS232, RS485, Modbus-RTU |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RS232 | 1:1 communication |
| Communication function: RS485 | 1: n communication (max 31) |
| Communication function: Modbus-RTU | 1: n communication |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
Yes! I am InterestedRequest A Callback
Panasonic MFDLNA3BE Minas A6 Series AC Servo Drive, 3 KW
Product Price: Rs 66,500 / PieceGet Best Price
Product Details:
| Series | MINAS A6 |
| Power Rating | 3 kW |
| Input Voltage | 220 VAC |
| Rated Power | 3 kW |
| Driver Type | EtherCat |
| Supply Voltage | 3 Phase |
| Brand | Panasonic |
| Model | MFDLNA3BE |
- Frequency response: 3200 Hz
- Supports network communication "EtherCAT"
- High-Speed 100 Mbps
- Real-time auto tuning function, Anti-vibration filters are available.
- EtherCAT with many supported applications
[7 control modes, 32 hm methods, DC(Synch), SM2(Synch), FreeRUN (Non-synch)] - System-up possible with various slaves.
- Supports PC-based controller.
- Smallest EtherCAT drive in market.
- Supports pc setup software PANATERM
- Lifespan diagnosis/Deterioration diagnosis
Yes! I am InterestedRequest A Callback
Panasonic MFDLTB3SF Minas A6 Series AC Servo Drive, 5 KW
Product Price: Rs 57,000 / PieceGet Best Price
Product Details:
| Rated Power | 5 kw |
| Brand | Panasonic |
| Model | MFDLTB3SF |
| Driver Type | Multi Function |
| Supply Voltage | 3 Phase |
| Item | Specifications |
|---|---|
| Part Number | MFDLTB3SF |
| Product details | A6SF series Multifunction type (Pulse analog full-closed) with the safety function |
| Family Name | MINAS A6 |
| Series | A6SF series |
| Type | Multifunction type |
| Frame | F-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control, Velocity control, Torque control, and Full-closed control |
| Safety Function | with |
| Supply voltage | 3-phase 200 V |
| I/F Classification of type | Analog /Pulse, Modbus (RS485 /RS232) |
| Dimensions (W) (Unit: mm) | 130 |
| Dimensions (H) (Unit: mm) | 220 |
| Dimensions (D) (Unit: mm) | 216 |
| Mass (kg) | 5.2 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | 3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| External scale feedback | A/B phase, homing signal differential input. ”A communication protocol developed for Servo Motor encoders of Panasonic Industry Co., Ltd.” is also supported. |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Input |
3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs) |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) Both open collector and line driver interface can be connected. High speed line driver interface can be connected. |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) Line driver output for encoder pulses (A/B/Z signal) or external feedback pulses (EXA/EXB/EXZ signal) open collector output also available for Z or EXZ signal. |
| Communication function | USB, RS232, RS485, Modbus-RTU |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RS232 | 1:1 communication |
| Communication function: RS485 | 1: n communication (max 31) |
| Communication function: Modbus-RTU | 1: n communication |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
Yes! I am InterestedRequest A Callback
Panasonic MFDLNB3BE Minas A6 Series AC Servo Drive, 5 KW
Product Price: Rs 71,500 / PieceGet Best Price
Product Details:
| Series | MINAS A6 |
| Power Rating | 5 kW |
| Brand | Panasonic |
| Input Voltage | 220 VAC |
| Type | AC |
| Model Name/Number | MFDLNB3BE |
| Input Phase | 3 Phase |
| Rated Power | 5 KW |
| Power | 5 kw |
| Encoder Type | EtherCat |
- Frequency response: 3200 Hz
- Supports network communication "EtherCAT"
- High-Speed 100 Mbps
- Real-time auto tuning function, Anti-vibration filters are available.
- EtherCAT with many supported applications
[7 control modes, 32 hm methods, DC(Synch), SM2(Synch), FreeRUN (Non-synch)] - System-up possible with various slaves.
- Supports PC-based controller.
- Smallest EtherCAT drive in market.
- Supports pc setup software PANATERM
- Lifespan diagnosis/Deterioration diagnosis
Yes! I am InterestedRequest A Callback
Panasonic MBDLT25SF A6 Series AC Servo Drive, 400 Watt
Get Latest Price
Product Details:
| Rated Power | 400 W |
| Phase | Single Phase |
| Brand | Panasonic |
| Torque | 1.27 |
| Model Name/Number | MBDLT25SF |
| Encoder | Absolute |
| Driver Type | MULTIFUNCTION |
| Item | Specifications |
|---|---|
| Part Number | MBDLT25SF |
| Product details | A6SF series Multifunction type (Pulse analog full-closed) with the safety function |
| Family Name | MINAS A6 |
| Series | A6SF series |
| Type | Multifunction type |
| Frame | B-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control, Velocity control, Torque control, and Full-closed control |
| Safety Function | with |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | Analog /Pulse, Modbus (RS485 /RS232) |
| Dimensions (W) (Unit: mm) | 55 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 130 |
| Mass (kg) | 1.0 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| External scale feedback | A/B phase, homing signal differential input. ”A communication protocol developed for Servo Motor encoders of Panasonic Industry Co., Ltd.” is also supported. |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Input |
3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs) |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) Both open collector and line driver interface can be connected. High speed line driver interface can be connected. |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) Line driver output for encoder pulses (A/B/Z signal) or external feedback pulses (EXA/EXB/EXZ signal) open collector output also available for Z or EXZ signal. |
| Communication function | USB, RS232, RS485, Modbus-RTU |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RS232 | 1:1 communication |
| Communication function: RS485 | 1: n communication (max 31) |
| Communication function: Modbus-RTU | 1: n communication |
| Control mode | Switching among the following 7 mode is enabled, (1) Position control, (2) Speed control, (3) Torque control, (4) Position/speed control, (5) Position/Torque control, (6) Speed/Torque control, (7) Full-closed control |
Yes! I am InterestedRequest A Callback
Panasonic MBDLN25BE Minas A6 Series AC Servo Drive, 400 Watt
Get Latest Price
Product Details:
| Rated Power | 400 W |
| Brand | Panasonic |
| Encoder Type | ABS |
| Driver Type | EtherCAT |
| Model | MBDLN25BE |
| Item | Specifications |
|---|---|
| Part Number | MBDLN25NE |
| Product details | A6NE series RTEX Ultra high-speed Network type (Basic type) without the safety function |
| Family Name | MINAS A6 |
| Series | A6NE series |
| Type | RTEX, Ultra high-speed Network (Basic type) |
| Frame | B-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control, Velocity control, and Torque control |
| Safety Function | without |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | RTEX |
| Dimensions (W) (Unit: mm) | 55 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 130 |
| Mass (kg) | 1.0 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| Parallel I/O connector: Control signal Input |
Each 8 input can be assigned by the parameter. |
| Parallel I/O connector: Control signal Output |
Each 3 input can be assigned by the parameter. |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Output |
Line driver output for encoder pulses (A/B phase signal). |
| Communication function | RTEX, USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RTEX | Communication for transmission of a real-time operation command, the parameter setting, or the status monitoring. |
| Regeneration | No built-in regenerative resistor (external resistor only) |
Yes! I am InterestedRequest A Callback
Panasonic MCDLT35SF Minas A6 Series AC Servo Drive, 750 Watt
Get Latest Price
Product Details:
| Rated Power | 750 W |
| Brand | Panasonic |
| Driver Type | Multi Function |
| Supply voltage | Single/3-phase 200 V |
| Model | MCDLT35SF |
| Item | Specifications |
|---|---|
| Part Number | MCDLT35SF |
| Product details | A6SF series Multifunction type (Pulse analog full-closed) with the safety function |
| Family Name | MINAS A6 |
| Series | A6SF series |
| Type | Multifunction type |
| Frame | C-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control, Velocity control, Torque control, and Full-closed control |
| Safety Function | with |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | Analog /Pulse, Modbus (RS485 /RS232) |
| Dimensions (W) (Unit: mm) | 65 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 170 |
| Mass (kg) | 1.6 |
| Environment | For more details, please refer to the instruction manual. |
| Item | Specifications |
|---|---|
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * When using it as an incremental system (not using multi-turn data), do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings). |
| External scale feedback | A/B phase, homing signal differential input. ”A communication protocol developed for Servo Motor encoders of Panasonic Industry Co., Ltd.” is also supported. |
| Parallel I/O connector: Control signal Input |
General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output |
General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Input |
3 inputs (16-bit A/D : 1 input, 12-bit A/D : 2 inputs) |
| Parallel I/O connector: Analog signal Output |
2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input |
2 inputs (Photo-coupler input, Line receiver input) Both open collector and line driver interface can be connected. High speed line driver interface can be connected. |
| Parallel I/O connector: Pulse signal Output |
4 outputs (Line driver: 3 output, open collector: 1 output) Line driver output for encoder pulses (A/B/Z signal) or external feedback pulses (EXA/EXB/EXZ signal) open collector output also available for Z or EXZ signal. |
| Communication function | USB, RS232, RS485, Modbus-RTU |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Communication function: RS232 | 1:1 communication |
| Communication function: RS485 | 1: n communication (max 31) |
| Communication function: Modbus-RTU | 1: n communication |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
Yes! I am InterestedRequest A Callback
MHMF042L1V2M Panasonic Minas A6 Series Servo Motor, 400 watt with brake, 3000 RPM
Get Latest Price
Product Details:
| Power | 0.4 KW |
| Type | AC |
| Voltage | 220V AC |
| Usage/Application | Industrial |
| Brand | Panasonic |
| Torque | 1.27 NM |
| Part Number | MHMF042L1V2M |
| Details | High inertia, Lead wire type |
| Family Name | MINAS A6 |
| Series | MHMF Series |
| Type | High inertia |
| Flange sq. dimension | 60 mm sq. |
| Flange sq. dimension (Unit:mm) | 60 |
| Motor lead-out configuration | Lead wire |
| Motor encoder connector | Lead wire |
| Power supply capacity (kVA) | 0.9 |
| Voltage specifications | 200 V |
| Rated output | 400 W |
| Rated current (A (rms)) | 2.1 |
| Holding brake | with |
| Mass (kg) | 1.6 |
| Oil seal | with |
| Shaft | Key-way, center tap |
| Rated torque (N ⋅ m) | 1.27 |
| Continuous stall torque (N ⋅ m) | 1.40 |
| Momentary Max. peak torque (N ⋅ m) | 4.46 |
| Max. current (A (o-p)) | 10.4 |
| Rated rotational speed (r/min) | 3000 |
| Rated rotational Max. speed (r/min) | 6500 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 0.58 |
| Recommended moment of inertia ratio of the load and the rotor | 30 times or less |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
Brake specifications
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 1.6 or more |
| Engaging time (ms) | 50 or less |
| Releasing time (ms) | 20 or less |
| Exciting current (DC) (A) | 0.36 |
| Releasing voltage (DC) (V) | 1 or more |
| Exciting voltage (DC) (V) | 24 ± 2.4 |
Yes! I am InterestedRequest A Callback
MHMF042L1U2M - Panasonic Minas A6 Series Servo Motor, 400 Watt, 3000 RPM
Get Latest Price
Product Details:
| Power | 0.4 KW |
| Type | AC |
| Voltage | 200V AC |
| Brand | Panasonic |
| Input Phase | Single Phase / Three Phase |
| Torque | 1.27 NM |
| Part Number | MHMF042L1U2M |
| Details | High inertia, Lead wire type |
| Family Name | MINAS A6 |
| Series | MHMF Series |
| Type | High inertia |
| Flange sq. dimension | 60 mm sq. |
| Flange sq. dimension (Unit:mm) | 60 |
| Motor lead-out configuration | Lead wire |
| Motor encoder connector | Lead wire |
| Power supply capacity (kVA) | 0.9 |
| Voltage specifications | 200 V |
| Rated output | 400 W |
| Rated current (A (rms)) | 2.1 |
| Holding brake | without |
| Mass (kg) | 1.2 |
| Oil seal | with |
| Shaft | Key-way, center tap |
| Rated torque (N ⋅ m) | 1.27 |
| Continuous stall torque (N ⋅ m) | 1.40 |
| Momentary Max. peak torque (N ⋅ m) | 4.46 |
| Max. current (A (o-p)) | 10.4 |
| Rated rotational speed (r/min) | 3000 |
| Rated rotational Max. speed (r/min) | 6500 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 0.56 |
| Recommended moment of inertia ratio of the load and the rotor | 30 times or less |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
Yes! I am InterestedRequest A Callback
MHMF082L1U2M Panasonic A6 Series Servo motor, 750 watt
Get Latest Price
Product Details:
| Power | 0.75 KW |
| Type | AC |
| Voltage | 220V AC |
| Usage/Application | Industrial |
| Brand | Panasonic |
| Torque | 2.39 NM |
| Speed | 3000-6000 RPM |
| Item | Specifications |
|---|---|
| Part Number | MHMF082L1V2M |
| Details | High inertia, Lead wire type |
| Family Name | MINAS A6 |
| Series | MHMF Series |
| Type | High inertia |
| Special Order Product | Special Order Product |
| Cautions for Special ordering product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP65 |
| About Enclosure | Except rotating portion of output shaft and leadwire end. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 80 mm sq. |
| Flange sq. dimension (Unit:mm) | 80 |
| Motor lead-out configuration | Lead wire |
| Motor encoder connector | Lead wire |
| Power supply capacity (kVA) | 1.8 |
| Voltage specifications | 200 V |
| Rated output | 750 W |
| Rated current (A (rms)) | 3.8 |
| Holding brake | with |
| Mass (kg) | 3.0 |
| Oil seal | with |
| Shaft | Key-way, center tap |
| Rated torque (N ⋅ m) | 2.39 |
| Continuous stall torque (N ⋅ m) | 2.86 |
| Momentary Max. peak torque (N ⋅ m) | 8.36 |
| Max. current (A (o-p)) | 18.8 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4283 |
| Rated rotational speed (r/min) | 3000 |
| Rated rotational Max. speed (r/min) | 6000 |
| Moment of inertia of rotor ( x10-4 kg ⋅ m²) | 1.66 |
| Recommended moment of inertia ratio of the load and the rotor | 20 times or less |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
Yes! I am InterestedRequest A Callback
MDMF102L1G6M Panasonic Minas A6 Series Servo Motor, 1KW
Get Latest Price
Product Details:
| Power | 1 KW |
| Type | AC |
| Voltage | 220V AC |
| Usage/Application | Industrial |
| Brand | Panasonic |
| Torque | 4.77 NM |
| Brand | Panasonic |
| Voltage | 220 Voltage AC |
| Model Name/Number | MDMF102L1G6M |
| Country of Origin | Made in India |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Protection class | IP67 |
| Flange sq. dimension | 130 mm sq. |
| Flange sq. dimension (Unit:mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor Encoder Connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor Encoder Connector | Connector JL10 (Large size): Also applicable to screwed type |
| Connector JL10 (Large size): Also applicable to screwed type | 2.4 |
| Rated Output | 1000 W |
| Rated current (A (rms)) | 5.2 |
| Weight | 4.6 |
| Continuous Stall Torque (N m) | 5.25 |
| Momentary Max. peak torque (N m) | 14.3 |
| Max. current (A (o-p)) | 22 |
| Rated rotational speed (r/min) | 2000 |
| Rated rotational Max. speed (r/min) | 3000 |
Yes! I am InterestedRequest A Callback
MDMF102L1H6M Panasonic Make Minas A6 Series Servo Motor, 1 KW With Brake
Get Latest Price
Product Details:
| Power | 1 KW |
| Type | AC |
| Voltage | 220V AC |
| Usage/Application | Industrial |
| RPM | 2000 |
| Torque | 4.77 NM |
| Frame | 130 mm |
Yes! I am InterestedRequest A Callback
MDMF152L1H6M Panasonic Minas A6 Series Servo Motor, 1.5 KW With Brake
Get Latest Price
Product Details:
| Power | 1.5 KW |
| Type | AC |
| Voltage | 220V AC |
| Usage/Application | Industrial |
| RPM | 2000 |
| Torque | 7.17 nm |
| Item | Specifications |
|---|---|
| Part Number | MDMF152L1H6M |
| Product details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 130 mm sq. |
| Flange size (mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 2.9 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 1500 |
| Rated current (A rms) | 8.0 |
| Holding brake | with |
| Mass (kg) | 7.2 |
| Oil seal | with |
| Shaft | Key-way |
| Rated torque (N ⋅ m) | 7.16 |
| Continuous stall torque (N ⋅ m) | 7.52 |
| Momentary Max. peak torque (N ⋅ m) | 21.5 |
| Max. current (A 0-p) | 34 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4284 |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Max. rotational speed (r/min) | 3000 |
| Inertia of rotor ( x10-4 kg ⋅ m²) | 10.4 |
| Recommended inertia ratio | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 13.7 or more |
| Engaging time (ms) | 100 or less |
| Releasing time (ms) | 50 or less |
| Exciting current (DC) (A) | 0.79 |
| Releasing voltage (DC) (V) | 2 or more |
| Exciting voltage (DC) (V) | 24 ± 2.4 |
| About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. |
Yes! I am InterestedRequest A Callback
MDMF152L1G6M Panasonic Minas A6 Series Servo Motor, 1.5 KW
Get Latest Price
Product Details:
| Power | 1.5 KW |
| Type | AC |
| Voltage | 220V |
| Usage/Application | Industrial |
| RPM | 2000 |
| Torque | 7.16 NM |
| Item | Specifications |
|---|---|
| Part Number | MDMF152L1G6M |
| Product details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 130 mm sq. |
| Flange size (mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 2.9 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 1500 |
| Rated current (A rms) | 8.0 |
| Holding brake | without |
| Mass (kg) | 5.7 |
| Oil seal | with |
| Shaft | Key-way |
| Rated torque (N ⋅ m) | 7.16 |
| Continuous stall torque (N ⋅ m) | 7.52 |
| Momentary Max. peak torque (N ⋅ m) | 21.5 |
| Max. current (A 0-p) | 34 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4284 |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Max. rotational speed (r/min) | 3000 |
| Inertia of rotor ( x10-4 kg ⋅ m²) | 9.16 |
| Recommended inertia ratio | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
Yes! I am InterestedRequest A Callback
MDMF202L1H6M Panasonic Minas A6 Series Servo Motor, 2 KW With Brake
Get Latest Price
Product Details:
| Power | 2 KW |
| Type | AC |
| Voltage | 220V |
| Usage/Application | Industrial |
| RPM | 2000 |
| Torque | 9.55 nm |
| Item | Specifications |
|---|---|
| Part Number | MDMF202L1H6M |
| Product details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 130 mm sq. |
| Flange size (mm) | 130 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 3.8 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 2000 |
| Rated current (A rms) | 9.9 |
| Holding brake | with |
| Mass (kg) | 8.4 |
| Oil seal | with |
| Shaft | Key-way |
| Rated torque (N ⋅ m) | 9.55 |
| Continuous stall torque (N ⋅ m) | 10.0 |
| Momentary Max. peak torque (N ⋅ m) | 28.6 |
| Max. current (A 0-p) | 42 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4285 |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Max. rotational speed (r/min) | 3000 |
| Inertia of rotor ( x10-4 kg ⋅ m²) | 13.3 |
| Recommended inertia ratio | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 13.7 or more |
| Engaging time (ms) | 100 or less |
| Releasing time (ms) | 50 or less |
| Exciting current (DC) (A) | 0.79 |
| Releasing voltage (DC) (V) | 2 or more |
| Exciting voltage (DC) (V) | 24 ± 2.4 |
| About brake specifications | This brake will be released when it is energized. Do not use this for braking the motor in motion. Please refer to the details of [Motor Specification Description] , "Specifications of Built-in Holding Brake" and "Notes on [Motor specification] page, Note: 4. |
Yes! I am InterestedRequest A Callback
MDMF502L1H6M Panasonic Minas A6 Series Servo Motor, 5 KW
Get Latest Price
Product Details:
| Power | 5 KW |
| Type | AC |
| Voltage | 220V |
| Usage/Application | Industrial |
| RPM | 2000 |
| Torque | 23.9 NM |
| Item | Specifications |
|---|---|
| Part Number | MDMF502L1H6M |
| Product details | Middle inertia, Connector type |
| Family Name | MINAS A6 |
| Series | MDMF Series |
| Type | Middle inertia |
| Special Order Product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP67 |
| About Enclosure | Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 176 mm sq. |
| Flange size (mm) | 176 |
| Motor lead-out configuration | Connector |
| Motor encoder connector | Motor connector: JL10, Encoder connector: Large size JL10 |
| About Motor encoder connector | Connector JL10 (Large size): Also applicable to screwed type |
| Power supply capacity (kVA) | 7.8 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 5000 |
| Rated current (A rms) | 23.3 |
| Holding brake | with |
| Mass (kg) | 19.0 |
| Oil seal | with |
| Shaft | Key-way |
| Rated torque (N ⋅ m) | 23.9 |
| Continuous stall torque (N ⋅ m) | 26.3 |
| Momentary Max. peak torque (N ⋅ m) | 71.6 |
| Max. current (A 0-p) | 99 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4285 x 2 in parallel |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 2000 |
| Max. rotational speed (r/min) | 3000 |
| Inertia of rotor ( x10-4 kg ⋅ m²) | 63.0 |
| Recommended inertia ratio | 10 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 23-bit Absolute/Incremental system |
| Notice | When using a rotary encoder as an incremental system (not using multi-turn data), do not connect a battery for absolute encoder. |
| Rotary encoder: Resolution | 8388608 |
| Item | Specifications |
|---|---|
| Static friction torque (N ⋅ m) | 44.1 or more |
| Engaging time (ms) | 150 or less |
| Releasing time (ms) | 30 or less |
| Exciting current (DC) (A) | 1.29 |
| Releasing voltage (DC) (V) | 2 or more |
| Exciting voltage (DC) (V) | 24 ± 2.4 |
Yes! I am InterestedRequest A Callback
Panasonic MCDLN35BE Minas A6 Series AC Servo Drive, 750 Watt
Get Latest Price
Product Details:
| Rated Power | 750 W |
| Model | MCDLN35BE |
| Brand | Panasonic |
| Driver Type | EtherCat |
| Encoder Type | ABS |
Panasonic EtherCAT servo driver is Advanced EtherCAT servo driver for High-Performance Motion control. Its a smallest EtherCAT servo driver in market. Panasonic EtherCAT servo driver has many in-built supported applications (7 control modes of operation, 32 origin-return modes, 2 synchronous modes, and an asynchronous mode). Panasonic EtherCAT driver Support PC-based Controller.
Yes! I am InterestedRequest A Callback
Panasonic MEDLN83BE Minas A6 Series AC Servo Drive, 2 KW
Get Latest Price
Product Details:
| Power Rating | 2.2 kW |
| Type | AC |
| Voltage | 3 Phase |
| Power | 2 KW |
| Brand | Panasonic |
| Driver Type | EtherCat |
| Model | MEDLN83BE |
Yes! I am InterestedRequest A Callback